What is the Diameter of a Golf Hole?
June 20, 2008
What is the diameter of a golf hole and why are they all the same size? - Jim in San Antonio, TX
Well the diameter of a golf hole is 4.25 inches exactly… I’m sure many people have taken a putt only to miss and think to themselves… “If only that hole was just a bit bigger my ball would have slipped right in.” So why was this standard golf hole size chosen to begin with? Here’s the answer. The Royal and Ancient Golf Club of St. Andrews, issued new rules in 1891 with the purpose of making the game more consistent and one of the ways they decided to accomplish this was to standardize the size of the golf hole. The size that they arrived at became the hole that we are all fond of today with the magic diameter of 4.25 inches.
Actually, this is the end result of the rules that previous incarnation of Royal Musselburgh Golf Club had come up with back in 1829. This led to the creation of the first known hole cutter and believe it or not this ancient ground eater is still in existence and is on display at Royal Musselburgh and was the exact 4.25 inches in diameter that we all are familiar with today. After the great people running the Royal and Ancient Golf Club adopted it into their rules back 1891 and the rest of the world followed.
However, there is a bit of wonder surrounding why the first hole cutter was created at this specific size. But more than likely, it was a totally arbitrary decision. Take that next putting stroke with pride and know you’re hitting your balls deep into a piece of golf history every time you take a putt.
Listen to this post
Beginner Golf Tips - Key to Golf Ball Spin
May 19, 2008
Teach me how to put spin on a golf ball, please? Very new to golf and watching my friends do it over and over with ease makes me want to learn how. Many thanks!! - Jim in Trinidad, CO
Strangely enough, putting spin on a golf ball happens whenever you hit the ball. The key here is obvious, learn how to do it when you want or need to. Through practice, practice, practice and a ton of dedication you will know how to spin a golf ball at will. Having golf ball spin is highly useful, especially to keep your score down. So here are some simple steps to apply that are key to golf ball spin.
Stand with your feet closer together. Position yourself in such a way that the ball is as close to your back foot, as possible. Make sure to use a 60° wedge, also known as a flop wedge is recommended for playing such a shot. A sand wedge can be used in emergency. When you take your swing, you need to swing your club on steeper plane to where you make impact directly at the bottom of the ball.
Don’t let yourself become distracted though by watching your friends putting spin on a golf ball. They have definitely worked themselves to the point where they can make it look so easy and that is something that should be admired rather than envied. Remember to let yourself focus on what you want to achieve but don’t be too attached to the result.
Worrying about it while you are taking your swing will do nothing but frustrate you and hold you back. So follow those simple steps you and will have the key to golf ball spin whenever you need it. Also, you may want to check out my other posts on this subject to get more information and a broader perspective of how its done. Check out How to Put Spin on a Golf Ball and Making Golf Spin Happen. Happy strokes!!
Listen to this post
Beginner Golf Swing Tips - Accuracy in Golf
May 8, 2008
How do I increase my accuracy in golf when I take a shot? - Jake in Austin, TX
Good question Jake, increasing your accuracy in golf is definitely a worthwhile pursuit if you are serious about improving your game and enjoying it as much as possible. Here are 3 simple beginner golf swing tips to help you wrap your mind around putting those shots exactly where you want them to go.
When you are seeking to improve your driving accuracy its highly important to keep your mind on your swing plane. A good way to illustrate this is that if your swing is too steep, such as being on an “outside in” path, you will most likely end up slicing the ball. Practice swinging your club as if the ball was waist high. Since the swing is a circle tilted over, it will become much easier for you to transfer the swing you make when the ball is waist high to the swing you make when the ball is on the ground.
Also, you have to maintain a steady rhythm with your swing for better golf driver accuracy. This is developed by using counting to yourself when you swing. Counting “one thousand one” and the back swing and “one thousand two” on the downswing will help to create a smooth rhythm.
Lastly, being able to have a fine control of the club face is necessary for having highly controlled accuracy in golf. By possessing a good grip, you should have the ability to hit a ball to the left or the right at will. Having the ability to do both enables you through practice and perseverance to increase your overall accuracy and hit the ball straight. Happy strokes!!
Listen to this post
How a Golf Fade Works
April 28, 2008
Would you explain to me how to make a golf fade works and how it’s different from a slice? - Jeff in San Antonio, TX
A fade in golf is a term given to the flight path of a golf ball as it comes off the clubface. The trajectory of the ball will move from the left of your intended target before it curves slightly back to the right. How a golf fade can get confused with a slice in golf is simple to understand especially for beginners. Basically a slice is a severe and unintended curve of the golf ball to the right.
Now to fade a golf ball you should align your body to the left of the target and point your clubface directly at the target and here are 4 easy steps to follow that will help you produce a golf fade to envy.
Step 1
Set your clubface square to the ball. Hold the very tight in the bottom three fingers of your left hand.
Step 2
Aim your feet and shoulders to the left of the target making sure the clubface is still square.
Step 3
Because you are aiming your body towards the left except for the club, it should force you to make an out-to-in swing path. Aim to hit the ball at a 2 o’clock angle.
Step 4
Now on the downswing your focus should be on bringing the club back across the ball, with your angle of attack brought down on the 2 o’clock position of the ball which should give you a feeling of your right hand coming underneath the shot.
After you make this method your own, you can fade a golf ball whenever you need it and use it as a tool to set you up for that perfect putt. Happy strokes!!
Listen to this post
How to Chip a Golf Ball
April 17, 2008
Hey can you tell me how to chip a golf ball please? - Steve in Dover, TN
Basically, a chip shot is a putt that has a short flying start. For this you will need a club that has a low loft. This will range from a 4-iron to a 7-iron and will allow the ball get up and over onto the putting surface. Now, as you are holding your club, its best to move your hands towards the bottom of the handle.
Also, you should hold the shaft in a more vertical way as if you were holding a putter. From here simply make a straight-back and straight-through movement at the ball as you take your stroke. This will utilize the loft of the club and will send the ball towards the hole.
Another way you can try chipping a golf ball is to move the handle forward a small amount where you put some more weight on your forward foot. If you are feeling ambitious and want to go after that longer hole, use a club like a 7-iron. You would follow the same steps of taking a simple, straight-back and straight-through motion.
This chipping stroke will send the ball up into the air and again, as it lands it will roll it’s way onto the hole. I find this to be an excellent choice when I’m too far away to take a putting stroke while at the same time being too close to launch a ball with a driver. Happy strokes!!
Listen to this post
How to Put Spin on a Golf Ball
February 27, 2008
I really want to learn how to get a good spin on a golf ball when I’m trying to shoot over an obstacle or get the ball to land in a position where I can make an easy putt. It’s something I’ve always been curious about but could never get a handle on and I wanted to see if you knew of the best way to make this happen. - Jimmy in Little Rock, AR
Being able to put spin on a golf ball is not an easy thing to do. However, getting the ball to stop almost where it lands can help you keep your score down and ultimately win a game. This becomes especially useful when you’re hitting onto firm greens or when the pin is placed directly behind a bunker or body of water. Listed below are some simple to follow steps towards becoming familiar with the basic technique of adding a good spin on a golf ball.
Step 1:
Stand closer in your stance for a normal golf swing which is a shoulder-width apart, so go ahead and stand about 1/3 shorter of the regular shoulder-width stance.
Step 2:
Also, stand a little closer to the ball so that its closer to your back foot.
Step 3:
Use a 60-degree wedge which is also known as a flop wedge.
Step 4:
Make sure to swing your club on a steeper plane than what you would during a regular shot. Basically hit down at a steeper angle.
Step 5:
Hit directly underneath the ball before taking a divot and do your best to take a divot that is long and shallow.
Step 6:
Follow through as you would during a normal shot.
An easy way to look at is to take an analogy from playing pool. When you put backspin on a golf ball it’s very similar in nature to putting backspin on a cue ball. To accomplish this you strike the cue ball at a steep downward angle with a great deal of force which then imparts this energy on the bottom half of the cue ball and sends it flying.
Perhaps you had the experience of being able to make the ball actually hop up into the air over other balls on the table to achieve a desired effect. Wow, all these different types of ball shots can be a bit mind boggling. But, balls are balls and the harder you hit them, the farther they shoot.
Adding spin on a golf ball allows to hit shots over obstacles such as bunkers, bodies of water, the rough or whatever it is that is in between you and the green. If you put enough backspin on the ball, it takes a couple of bounces and stops. In a perfect world, you would like to be in the position where you hit the ball about 15 to 20 feet from the pin and have the it stop a few feet from the hole and this will leave you a with short putt.
So if you like watching your balls soar through the air and land exactly where you desire then dedicated practice is key to your ability to put spin on a golf ball. But keep in mind that this is one of the hardest shots to master.
Update to Post:
Hi all, recently I’ve had readers take a lot of interest in this particular post and wanted to provide links my other posts on this topic. So go check out my other posts to get a better understanding of this technique by reading Making Golf Spin Happen and Beginner Golf Tips - Key to Golf Ball Spin
Happy stokes!!
Listen to this post
How to Get the Best Putting Stroke Possible and Some Putting Tips to Boot
February 25, 2008
This may seem like a real amateur question, but I am having a heck of a time with my putter stroke. It’s not so much that I freeze up but I have this strange tendency to space out right before. I really try to make the best putting stroke possible but it always seems that the ball gets right to the edge and just sits there. What can I do to improve? - Frank in Boise, ID
That definitely is a bad situation to be in, now as far as you spacing out right before you putt… I would say that you should probably cut back on certain things that inhibit you concentration. You know what I’m talking about.
Grab a couple of small pieces of wood about 8 inches long by half an inch wide. If you have a couple wood rulers laying around, those would be perfect for this. Now take these with your putter and some balls and go out to your local putting green. What you want to do is line up the two pieces of wood in front of where you will take your stance and these should point in the direction in which you are going to putt.
However, leave them far enough apart that your putter head has about a half inch clearance on either side. These two pieces of wood will form an alley that your putter head and golf ball will travel down. Now take practice putts from 5 to 10 feet in length and focus your mind on taking the putter back straight and following through with shooting the golf ball as straight as possible through this alley. The purpose is to not make contact with the pieces of wood so you can develop your putting stroke.
I have found out through my own experience as well as with helping other virgin golfers that if you are very inconsistent, this technique can really help you get the putter moving in the correct motion. Keep in mind that this will also improve your direction control during your putter stroke.
Frank, by using this simple technique, you will keep your balls from stopping and hanging right at the edge of the hole and sink that putt time and time again. We all know how frustrating that can be when you get so close…
Listen to this post
-
Golf Resources
